Raymarine 435i Owner's Handbook Manual page 63

Chapter 5: Operation
➤
To edit a waypoint using the Waypoint List:
1. From chart mode, press ENTER to display the primary function bar.
2. Using trackpad left/right, select WAYPOINTS.
3. Select WAYPOINT LIST; the Waypoint List is displayed, with its associ-
4. Select EDIT WAYPOINT; the waypoint edit functions are displayed.
5. To edit the waypoint name, select EDIT NAME; the cursor is placed in
6. To edit the waypoint symbol, select EDIT SYMBOL.
7. To change the waypoint's position, select EDIT POSITION. The cursor
ated function bar.
the name field of the selected waypoint.
i. Edit the name as previously described (up to eight characters).
i. Use trackpad left/right to highlight the desired symbol.
ii. Press ENTER to accept the choice or CLEAR to abort the operation.
is placed in the Position field in the Waypoint List.
i. Use trackpad left/right to select the latitude/longitude fields.
ii. Use trackpad up/down to scroll through and edit the values.
iii.When editing is complete, press ENTER to save the new position
or CLEAR to abort the operation.
53
D6233-1
D6236-1
D4692-1
D4675-1