Chapter 4: Setting Up
3. Use trackpad up/down to highlight the desired parameter, then use
Note: There are two screens for Chart Set-up. Scroll past MORE... to ac-
cess the other screen.
4. When the desired values have been set, press ENTER to clear the
5. Press CLEAR to return to the normal display.
The table below lists the Chart Set up parameters and their options, shows
the factory default setting and provides a space to make a note of the new
default setting.
.
Parameter
ORIENTATION
PLOTTER MODE
SHOW WAYPOINTS
WAYPOINT SYMBOL
AUTOZOOM
SCREEN AMPLIFIER
COG VECTOR
ARRIVAL CIRCLE
ANCHOR ALARM
XTE ALARM
SELECT CHART
CHART TEXT
CHART BOUNDARIES
SAFETY CONTOURS
trackpad left/right to select the desired setting.
menu and return to the set up function bar.
Options
NORTH UP
COURSE UP
HEAD UP
OFF/ON
OFF/ON
FISH, SKULL,
ANCHOR or X
OFF/ON
OFF/ON
OFF/ON
0.01nm, 0.05nm,
0.1nm, 0.5nm
OFF, 0.01nm,
0.05nm, 0.1nm,
0.5nm
OFF, 0.01nm,
0.05nm, 0.1nm,
0.3nm, 0.5nm
OFF/LOAD CHART
OFF/ON
OFF/ON
OFF/2m/5m/10m/
20m
Factory
Default
New Setting
NORTH UP
ON
ON
X
ON
ON
OFF
0.1nm
OFF
OFF
OFF
ON
ON
2m
39