Archiving A Waypoint Set - Raymarine 435i Owner's Handbook Manual

92

Archiving a Waypoint Set

➤
To archive the waypoints currently loaded on the system:
1. In chart mode, press ENTER; the primary function bar is displayed:
2. Using trackpad left/right, select ARCHIVES .
3. Select ARCHIVE WAYPOINT. You can now (if desired) change the name
• To rename a track in the archive:
Use trackpad up/down to select the track you wish to rename,
then use the trackpad left/right to select RENAME ARCHIVE and
press ENTER.
The first character of the selected track name will be highlighted.
Use the trackpad left/right to select the character and up/down to
change. When your changes are complete, press ENTER to save
or CLEAR to discard any changes.
of the waypoint set to be archived. Use trackpad left/right and up/
down to change. Press ENTER when complete. To leave without
archiving, press CLEAR.
RC435 and RC435i Chartplotters
D6233-1
D6254-1