Raymarine hsb2 PLUS Owner's Handbook Manual page 146

5-36
• You can transfer the waypoint and route lists from one chartplotter to
another across an
FROM HSB.
CAUTION:
The functions LOAD USER CARD, SEND WPT LIST ON HSB and RECIEIVE WPTS
FROM HSB replaces the existing waypoint and route lists with the
transferred lists.
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARKS followed by the LOAD/SAVE USER CARD soft key.
MARKS
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or
soft key; an appropriate warning and Yes/No soft keys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
link using SEND WPT LIST ON HSB and RECIEIVE WPTS
hsb
2
USER CARD MENU
USER CARD PRESENT
WARNING
SAVING DATA TO THE USER
CARD WILL ERASE ALL EXISTING
WAYPOINT AND ROUTE DATA
ON THE CARD.
hsb
LOAD WPT/RTE DATA FROM CARD
ARE YOU SURE ?
YES NO
5594-1
Plus Series Fishfinders
2