Removing A Waypoint From The Route; Reversing The Route - Raymarine hsb2 PLUS Owner's Handbook Manual

Chapter 5: Standard Chart Operations
Note: If you Clear the route before it is Saved, the new waypoint is removed.
Adding Waypoints at the End of the Route
➤ To add waypoints at the end of the route:
1. Press the ROUTE soft key, followed by the EDIT ROUTE soft key.
ROUTE
The Make Route soft keys are displayed and the cursor is connected to the
EDIT
last-placed waypoint with a dotted line. You can add further waypoints to
ROUTE
the route in the same way as for a new route.
2. Move the cursor to the required location, and press PLACE WAYPOINT soft
PLACE
WAYPOINT
key.
If you place the waypoint in the wrong position, press the UNDO WAYPOINT
UNDO
soft key.
WAYPOINT
Note: You can
3. Place as many waypoints as required, and press the ACCEPT ROUTE soft key,
ACCEPT
the default soft keys are displayed.
ROUTE

Removing a Waypoint from the Route

➤ To remove a waypoint from the current route:
1. Move the cursor over the required waypoint until the letters WPT are dis-
WPT
played. The waypoint soft keys are displayed.
2. Press the REMOVE WAYPOINT soft key. The waypoint is removed from the
REMOVE
route and the route is re-numbered.
WAYPOINT
Alternatively, you can remove the last waypoint from a route by pressing the
UNDO WAYPOINT soft key, as described above in Adding Waypoints at the
End of the Route on page 5-29.
If the route has not been saved, the waypoint is erased.
If the route has been saved, the waypoint remains on the screen.

Reversing the Route

➤ To reverse the route, so you can Follow the route back:
1. Either press the ROUTE soft key followed by MORE,
ROUTE
or move the cursor over the required waypoint until the letters RTE are dis-
played.
The route soft keys are displayed.
REVERSE
2. Press the REVERSE ROUTE soft key. The current route is reversed on the
ROUTE
screen.
UNDO
waypoints in the original route, not just the new ones.
5-29