Mounting The Drive - Raymarine IO Drive Installation Manual

I/O Drive - Installation Guide

2. Mounting the drive

Figure 3: Typical Suppression Ferrites
CAUTION:
I/O drives are affected by substantial vibration during use. When
installing this I/O drive, make sure that you fully tighten all bolts
and use lock washers. Using a suitable thread-locking compound
on the threads will help keep the bolts securely tightened.
Raymarine provide installation kits (see Figure 4) so you can fit the
drive unit to stern drive systems made by:
• Volvo: see page 8 for installation instructions
• Mercruiser 93, OMC and Yamaha: see page 10 for installation
instructions
• Mercruiser 95: see page 12 for installation instructions
• Volvo KAD 32: requires the KAD 32 I/O drive (part number:
E12019) see page 15 for installation instructions
R-clip
Adaptor pin
bracket
Figure 4: Installation kit parts (Volvo, Mercruiser 93, OMC and Yamaha)
Securing bolt
Shakeproof
washer
Girdle support
bracket
7
D3548-2
Split pin
Spring-loaded
location pin
D3365-2