Cleaning The Appliance; Storing The Appliance - Singer Steam care 170 LIMITED EDITION Instruction Manual

Descaling the limescale collector *
1. Place the limescale collector (8*) under the water tap.
2. Wash it up until limescale residues are removed.
Descaling the iron
1. Fill the tank (9) with tap water.
2. Plug in the mains cable (6) and press the button (1) to switch the appliance
on.
3. Press the descaling button (2) for 2 seconds. Its indicator light will remain
permanently lit.
4. Wait until the indicator light (1) stops fl ashing and remains lit permanently.
Two beeps will be heard.
5. Hold the iron in a horizontal position over an empty sink to collect the water.
Press the steam release button (14) for 2 seconds. The descaling process
will start automatically.
Warning: boiling water and steam will be released through the soleplate,
carrying limescale and/or deposits that may be inside. During the process,
a beep will be heard every 5 seconds.
6. After approximately 3 minutes, the iron will stop releasing steam. A long beep
will be heard, indicating that descaling process has fi nished. The appliance
will switch off automatically.
7. To clean the soleplate (16), immediately rub off any residue by running the
hot iron over a wet cotton cloth.

2. Cleaning the appliance

Regularly clean your appliance for properly maintenance. Attention! Burn
risk!
1. If the appliance is only slightly soiled, wipe it with a damp cotton cloth only,
and then dry it.
2. To keep the soleplate smooth, you should avoid contact with hard metal
objects. Never use a scouring pad, or chemicals to clean the soleplate.

STORING THE APPLIANCE

1. Unplug the appliance and let it cool down. Empty the water tank (9).
2. Place the iron on the steam station, standing on the pad (12).
If your steam station is equipped with iron lock system (13*), fi x the iron to it.
First insert the heel and
9
ENGLISH