Energy Saving - Singer Steam care 170 LIMITED EDITION Instruction Manual

Important: Once refi lled, press button (3).
Tip: To prolong the optimum steam function, you may mix tap water with
distilled water 1:1. If the tap water in your area is very hard, mix tap water with
distilled water 1:2.
2. Heating
1. If your steam station is equipped with an iron lock system (13*), release the
iron by pressing the
2. Unwind the steam hose (5) and the mains cable (6). Plug mains cable into
an earthed socket.
3. Press the button (1) to switch the appliance on. Indicator lights (1, 15) will
fl ash indicating that the appliance is heating up.
4. When the iron is ready to use, the indicator lights (1, 15) will remain
permanently lit. Two beeps will be heard.
3. Ironing
1. Press the steam release button (14) for ironing with steam.
Tip: For better ironing results, iron the last strokes without pressing the steam
release button (14) to dry the garment.
"PulseSteam" function
This appliance has a special function for tackling diffi cult creases.
2. Press the steam release button (14) two times in quick succession
(double-click). Powerful shots of steam will be released.
Vertical steam
Can be used to remove creases from hanging clothes, curtains, etc.
1. Hold the iron in an upright position 15 cm away from the garment to be
steamed.
3. Press the steam release button (14) repeatedly with pauses of at least 5
seconds.
Warning! : never point the steam jet at garments being worn, or at people
or animals.

4. Energy saving

If the energy saving setting is selected, you can save energy and water and
still achieve good results when ironing most of your garments.
button.
7
ENGLISH