Suzuki NEXA FRONX Owner's Manual & Service Booklet page 371

(4)
(5)
(4)
55T090710
(4) Locked end
5) Install the new blade in the reverse
order of removal, with the locked end
positioned toward the wiper arm. Make
sure the blade is properly retained by
all the hooks. Lock the blade end into
place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
NOTICE
Fit the stopper side (5) of the wiper
blade rubber in the driver's seat side.
Otherwise, the wiper blade rubber
may be misaligned while the wiper
operates.
For Rear Window Wiper
55TB0909
1) Hold the wiper arm away from the win-
dow.
2) Remove the wiper frame from the arm
as shown.
59RN09300
INSPECTION AND MAINTENANCE
3) Slide the blade out as shown.
NOTE:
Do not flex the wiper blade frame end more
than necessary. If you do, it can break off.
(1)
59RN09310
(1) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
5) Install the new blade in the reverse
order of removal.
Make sure the blade is properly
retained by all the hooks.
6) Reinstall wiper frame to arm in the
reverse order of removal.
55TH0-74E
(1)
9-36