Playing From An Mp3 Player - Linear dmc1 System Master dmcMP3 Operation & User’s Manual

Intercom and music system, with cd/mp3 player
Hide thumbs Also See for dmc1 System Master dmcMP3:
Table of Contents

Advertisement

Playing from an MP3 Player

Portable MP3 players sit on top of the
device drawer's rubber inner cover.
Audio from the player's headphone jack
connects to the 3.5 mm audio input jack
on the side of the device drawer with the
cable supplied.
The player can be charged (whether its
currently being used for music or not)
using the USB charging jack on the side of
the device drawer (cable is not supplied).
✓ Note: Depending on their design, some
devices may not accept a battery charge
when connected to the USB charging jack on
the device drawer.
Playing a Portable MP3 Player:
1. Press POWER to turn on the system.
2. On the master Station, press SOURCE
repeatedly to cycle through AM, FM, CD
and AUX until you reach CD.
3. Press on the front of the device drawer
to unlatch the spring lock and extend the
drawer all the way out.
4. Connect the headphone jack on your MP3
Player to one end of the 3.5 mm audio cable.
5. Connect the other end of the audio cable
into the audio input jack on the side of the
device drawer.
6. Set your MP3 Player on top of the rubber cover.
7. To charge the MP3 Player (optional) connect a
charging cable between the MP3 Player and
the USB jack on the side of the device drawer.
8. If a CD is inserted in the player, press the
SOURCE/EJECT button on the CD Player to
choose between the CD and the MP3 Player.
9. Select your music on the MP3 Player and
begin playing. THE BUTTONS ON THE
MASTER STATION DO NOT CONTROL
THE PLAYER, USE THE BUTTONS ON THE
PLAYER.
10. The MP3 player's volume control will affect
the overall volume of the system, set it
about mid-level, then use the master and
station volume controls.
Playing Music
USB
CHARGING
JACK
CONNECT MP3 PLAYER
TO AUDIO INPUT JACK
Figure 19. MP3 Player on Device Drawer
✓ Note: To prevent damage, be sure to close
the device drawer when a player is not
connected.
THE DISPLAY WILL SHOW
THE CLOCK AND CD SOURCE ONLY
WHEN THE AUDIO INPUT JACK IS SELECTED
CD
THE TRACK DISPLAY AREA WILL BE BLANK
Figure 20. Display Showing Audio Input Jack
Selection
SET MP3 PLAYER ON
DOCK'S SLIDE OUT
RUBBER TRAY
1
TRACK
3
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc1 system masterDmc1 system master dmcmp3aDmc1 system master dmcmpb

Table of Contents