Installation Steps; Emc Installation Guidelines - Raymarine Rotary Drive Installation Manual

6

Installation steps

1. EMC installation guidelines

WARNING: Electrical safety
Make sure you have switched off the power supply before you
start installing this product.
Follow these steps to install your rotary drive unit:
1
Consult the EMC installation guidelines.
2
Mount the drive.
3
Connect to the course computer.
4
Complete the post-installation check.
All Raymarine equipment and accessories are designed to the best
industry standards for use in the recreational marine environment.
Their design and manufacture conforms to the appropriate
Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not
compromised. Although every effort has been taken to ensure that
they will perform under all conditions, it is important to understand
what factors could affect the operation of the product.
The guidelines given here describe the conditions for optimum EMC
performance, but it is recognized that it may not be possible to meet
all of these conditions in all situations. To ensure the best possible
conditions for EMC performance within the constraints imposed by
any location, always ensure the maximum separation possible
between different items of electrical equipment.
For optimum EMC performance, it is recommended that wherever
possible:
• Raymarine equipment and cables connected to it are:
Rotary Drive - Installation Guide
Ï
Ï
Ï
page 6
page 8
page 13
page 15