Dear Installer - Rangemaster 110 Gas User Manual

Dear Installer

Before you start your installation, please complete the details BELOW.
If your customer has a problem relating to your installation they will be able to contact you easily.
Thank you
Installer's Name
Installer's Company
Installer's Telephone number
You will need the following equipment to complete the cooker
installation satisfactorily
STABILITY BRACKET
If the cooker is to be
supplied with gas
through a fl exible hose,
a stability bracket or
chain must be fi tted.
These are not supplied
by with the cooker but are
available at most builders
merchants.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit & Rawlplugs
(only required if fi tting the cooker on a
stone or concrete fl oor)
3. Steel tape measure
4. Cross head screwdriver
GAS PRESSURE TESTER
It is important the gas
pressure is set correctly
5.
6.
7.
8.
9.
FLEXIBLE GAS HOSE
Must be in accordance
with the relevant
standards. For LP Gas
it should be suitable
for LPG, capable of
50mbar pressure, 70°C
temperature rise and
carry a red stripe, band
or label.
A hose is not supplied by
with the cooker.
Flat head screwdriver
Spirit level
Pencil
Adjustable spanner
Screws for fitting stability bracket
23
MULTIMETER
(for electrical checks)
Make sure the
installation is electrically
safe.