Table of Contents
Advertisement
7. Apply grease to the axle on the Right Upper
Body Leg (6) and to a Medium Wave Washer
(119).
Slide a Leg Spacer (55) and the Medium Wave
Washer (119) onto the Right Upper Body Leg
(6). Make sure that the flat side of the Leg
Spacer is facing away from the elliptical.
Identify the Right Pedal Arm (12), which is
marked with a "Right" sticker, and orient it as
shown. Slide the Right Pedal Arm onto the
Right Upper Body Leg (6).
Attach the Right Pedal Arm (12) with an M8 x
16mm Patch Screw (102), an Axle Cover (56),
and an M8 x 23mm x 1.5mm Washer (126).
Repeat this step on the other side of the
elliptical.
8. Press the Right Pedal Arm (12) onto the right
Adjustment Sleeve (46). Make sure that the
Right Pedal Arm latches into place.
Attach a Mounting Block (116) to the right
Adjustment Pin (44) with an M6 x 12mm Patch
Screw (111).
Repeat this step on the other side of the
elliptical.
9. Attach an Adjustment Knob (45) to the right
Mounting Block (116) with two M4 x 16mm
Screws (93).
Repeat this step on the other side of the
elliptical.
7
12
8
46
9
9
6
Grease
119
55
126
56
12
116
111
44
93
116
45
93
102
Advertisement
Table of Contents
