1.
To make assembly easier, read the
information on page 5 before you begin.
Identify and orient the Front Stabilizer (3) as
shown.
While another person lifts the Frame (1), attach
the Front Stabilizer (3) to the Frame with two
M10 x 80mm Patch Screws (100) and two M10
Split Washers (123).
2. Identify and orient the Rear Stabilizer (4) as
shown.
Attach the Rear Stabilizer (4) to the Folding
Frame (2) with two M10 x 80mm Patch Screws
(100) and two M10 Split Washers (123).
Next, hold the handle on the Rear Stabilizer (4),
press the Latch Button (67), and lower the Rear
Stabilizer and the Folding Frame (2) to the floor.
1
2
100
123
4
2
67
6
100
123
3
1