Table of Contents
Advertisement
2
INSTALLATION OVERVIEW
2.1 Introduction
This section provides hardware equipment information for installing the GIA 63(W), related hardware,
and antennas. Installation of the GIA 63(W) should follow the aircraft TC or STC requirements. Cabling
is fabricated by the installing agency to fit each particular aircraft. The guidance of FAA advisory
circulars AC 43.13-1B and AC 43.13-2B, where applicable, may be found useful for making retro-fit
installations that comply with FAA regulations. Refer to the G1000 System Installation Manual, Garmin
part number 190-00303-00 for further details on the mechanical aspects. For installation in an aircraft
using the remote mounted standalone rack, refer to Appendix B for rack drawings and dimensions.
2.1.1 Unit Configurations
The GIA 63(W) is only available as a single unit under the following part number:
GIA 63 Unit Only, (011-00781-00)
GIA 63 ETSO Unit Only, (011-00781-01)
GIA 63W Unit Only, (011-01105-00)
GIA 63W A2/B2 Audio Lightning Unit Only (011-01105-01)
GIA 63W Updated NAV/COM (011-01105-20)
2.1.2 Required Accessories
Each of the following accessories is provided separately from the GIA 63(W). Either rack (modular or
standalone) and remainder of the accessories are required for installation.
GIA 63 Modular Install Rack
or
GIA 63 Standalone Install Rack
G1000 Rack Nutplate Kit (Modular Rack Only)
GIA 63 Back Plate
GIA 63 Connector Kit w/ Spider
GIA 63 Connector Kit w/ Shield Block
GIA 63/GIA 63W Installation Manual
190-00303-05
Item
Item
Garmin P/N
010-00335-00
010-00335-10
010-00386-00
010-00386-10
010-00386-20
Garmin P/N
115-00426-00
115-01239-00
011-00915-01 (preferred)
or
011-01148-01
011-00963-00
011-01000-00
011-01000-01
Revision S
Page 2-1
Advertisement
Table of Contents
