Frymaster FilterQuick FQG80T Service Manual page 17

Non- CE Standard for Incoming Gas Pressure
Fryer Model
Gas Type Nat
Incoming Min 6/1.49/14.93
Pressure
W.C/kpa/mbar
Incoming Max 14.00/3.48/34.84
Pressure
W.C/kpa/mbar
CE Standard for Incoming Gas Pressure
Fryer FQG80T
Model
Gas Type G20 G25
Pressure 20 20 or 25
(mbar) (1)
mbar=10,
2mm H 0
2
UKCA Standard for Incoming Gas Pressure
Fryer FQG80T
Model
Gas Type G20 G25
Pressure 20 20 or 25
(mbar) (1)
mbar=10,
2mm H 0
2
Australia Standard for Incoming Gas Pressure
Fryer Model
Gas Type Nat
Incoming Min TBD
Pressure
W.C/kpa/mbar
Incoming Max
TBD
Pressure
W.C/kpa/mbar
Korea Standard for Incoming Gas Pressure
Fryer Model
Gas Type Nat
Incoming Min TBD
Pressure
W.C/kpa/mbar
Incoming Max TBD
Pressure
W.C/kpa/mbar
When pressure-testing incoming gas supply lines, disconnect the fryer from the gas line if the test
pressure is ½" PSI [3.45 kPa (14 inches W.C.)] or greater to avoid damage to the fryer's gas piping
and gas valve(s).
NOTE: External gas regulators are not normally required on this fryer. A safety control valve protects the fryer against
pressure fluctuations. If the incoming pressure is in excess of ½" PSI (3.45 kPa/35 mbar), a step-down regulator is
required.
FQG80T
LP
11/2.74/27.37 6/1.49/14.93
14.00/3.48/34.84 14.00/3.48/34.84
FQG100T
G30 G31 G20
28/30 37 or 20
or 50 50
FQG100T
G30 G31 G20
28/30 37 or 20
or 50 50
FQG80T
LP
TBD TBD
TBD TBD
FQG80T
LP
TBD TBD
TBD TBD
FQG100T
Nat LP
11/2.74/27.37
14.00/3.48/34.84
G25 G30 G31
20 or 28/30 37 or
25 or 50 50
G25 G30 G31
20 or 28/30 37 or
25 or 50 50
FQG100T
Nat LP
TBD
TBD
FQG100T
Nat LP
TBD
TBD
DANGER
1-13
FQG120T
Nat
6/1.49/14.93 11/2.74/27.37
14.00/3.48/34.84 14.00/3.48/34.84
FQG120T
G20 G25 G30
20 20 or 25 28/30
or 50
FQG120T
G20 G25 G30
20 20 or 25 28/30
or 50
FQG120T
Nat
4.54/1.13/11.30 11.05/2.75/27.50
14.00/3.48/34.84 14.00/3.48/34.84
FQG120T
LNG (Natural) LPG (Propane)
4/1.00/10.00 9.2/2.30/23.00
10/2.50/25.00 13.2/3.30/33.00
LP
G31
37 or
50
G31
37 or
50
LP