Setting Fence Stops - Grizzly G0656P Instruction Manual

Setting Fence Stops

The fence stops simplify the task of adjusting the
fence to 45˚ inward, 90˚, and 45˚ outward (135˚).
Tools Needed
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Wrench 14mm ................................................... 1
Hex Wrench 3mm .............................................. 1
To set the 45˚ inward fence stop:
1.
Using a 45˚ square, adjust the fence to the
45˚ inward position, as shown in Figure 58.
Figure 58. Example of adjusting fence 45˚
inward.
2. Loosen the jam nut shown in Figure 59.
Fence Stop
Set Screw
Jam Nut
Figure 59. 45˚ inward fence stop set screw.
Model G0656 (Mfg. since 10/07)
3.
4.
To set the 90˚ fence stop:
Qty
1.
Figure 60. Example of adjusting fence to 90˚.
2.
Flip the 90˚ swing stop into the position
shown in Figure 61.
Swing Stop
Fence
Bracket
3.
Loosen the jam nut on the 90˚ fence stop bolt
(Figure 61).
4. Adjust the 90˚ fence stop bolt until it makes
contact with the 90˚ swing stop.
5. Retighten the jam nut loosened in Step 3.
Adjust the 45˚ inward fence stop set screw
until it makes contact with the back of the
fence bracket.
Retighten the jam nut loosened in Step 2.
Using a 90˚ square, adjust the fence to the
90˚ position, as shown in Figure 60.
Fence Stop Bolt
Figure 61. 90˚ swing stop engaged.
Jam Nut
-37-