2-1. Pulse Control
Specification
Overall Dimensions
Weight
Input Power Cord With Plug
Additional Required Equipment
Welding Power Source Type Needed
3-1. Typical Connections
Typical Connections For Welding Power Source Without HF
Welding Power
Source With
14-Socket Receptacle
Typical Connections For Welding Power Source With HF
SECTION 2 – SPECIFICATIONS
Height: 7-1/8 in (181 mm); Width: 9-1/4 in (235 mm); Length: 5-1/2 in (140 mm)
Net: 7.2 lb (3.3 kg); Ship: 8.8 lb (4 kg)
8 ft (2.4 m)
Welding Power Source And High-Frequency Unit
Constant Current (CC) DC Or AC/DC, With Suitable Remote 14 Receptacle And A Positive Reference
Command Signal Not To Exceed +10 Volts DC
SECTION 3 – INSTALLATION
Optional Extension Cords
Electrode Cable
Work Cable
To 115 Volt Supply
To 115 Volt
Supply
Welding Power
Source With HF
And 14-Socket
Receptacle
Description
To 115 Volt
Supply
HF Unit
Remote
Control
Pulser
Control
Torch
Work
Remote
Control
Pulser
Control
TIG
S-0848 / S-0849
OM-898 Page 5
TIG
Torch
Work