Dyson Gen5 Detect User Manual page 7

Clean filter
Your filter needs cleaning. Please refer to 'Washing your filter'.
After cleaning, leave to dry for at least 24 hours before
reattaching it to your machine.
Filter not sealed
Your filter isn't properly fitted. Twist your filter anti-clockwise
and pull it away from your machine. Reattach to your machine,
twisting it clockwise until it locks into place.
Change alert settings
You can turn the alert motor pulse off. Your motor will no longer pulse but
run time alert information will continue to be displayed on the LCD screen
when your machine needs your attention.
Turning off alerts will not turn off the blockage alert pulsing. This is to ensure
you clear any blockages, preventing damage to your machine.
Make sure you have entered the settings menu. Tap the Selection button to
move through the options within the settings menu. Press and hold the button
to select the 'Alerts' option.
Tap the button until your selection is highlighted. Hold it down until the
countdown ends and a tick appears on the screen. To cancel your selection,
release the button during the countdown.
Alert icon with
'Filter needs
cleaning' wording.
Alert icon with
'Filter not sealed'
wording.
Learn more about your LCD screen. View video on your owner's page.
Filter needs
cleaning
Filter not
sealed
Alerts
On
The Alerts screen The Alert settings
allows you to choose menu reads
On or Off. On, Off, Exit.
24h
+
Alert icon with a filter
graphic and '24+'
reminds you to leave
your filter to dry for
24hrs after washing.
On
Off
Exit