In The Box - Dyson Gen5 Detect User Manual

In the box

Your machine will come with one, or both, of the cleaner heads shown here.
Main body showing the bin and
battery attached.
Vacuum cleaner with
battery and bin attached
The charger is a one
piece unit with the
plug, connector end
and cable.
Charger
Charges your vacuum with
or without a dock.
Some tools may not be included.
You can buy additional tools at https://www.dyson.com.sg/
This tool has a
combination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
Combination tool Hair screw tool
Two tools in one – wide Anti-tangle conical
nozzle and brush, brush bar spirals hair
for quick switching off and into the bin.
between cleaning and Motor-driven cleaning
dusting tasks around for smaller spaces.
your home or car.
A short nozzle with
stiff bristles on the
underside.
Stubborn dirt brush Low-reach adaptor
Stiff nylon bristles Bends to comfortably
dislodge ground-in dirt reach down low.
from coarse carpets, Engineered to clean
high traffic areas and further under low
car interiors. furniture by adjusting
the wand angle
up to 90°.
A soft fluffy brush bar housed within
the cleaner head. There is an electrical
connecter end that can attach to the end
of the wand or directly to the machine.
Fluffy Optic™
cleaner head
A precisely-angled
blade of light makes
invisible dust visible
on hard floors.
A rectangular
dock that
needs to be
fixed to a wall
with screws.
Wall dock
The Dyson cordless vacuum
drops into the wall-mounted
charging dock, ready for
your next clean.
A small
The Scratch-free
cleaner head
dusting brush has
with an angled
a head made of
body housing
soft bristles for
the motor and
cleaning delicate
an electrical
connector to surfaces.
attach to the
directly to the
machine.
Scratch-free
dusting brush
Gentle on delicate
surfaces. Self-cleaning
– a rotating cuff keeps
the soft bristles clear
of dust.
With an elbow
joint, fitted
A long tool with
between the
an angled end.
bin and the
tool.
Light pipe crevice tool
Crevice tool with LED
lights lets you reach
into dark, narrow
spaces and see where
you're cleaning.
A brush bar located inside
the cleaner head and
a suction control slider
located on the front.
Digital Motorbar™ cleaner head
Dyson DLS™ technology monitors brush
bar resistance and adapts power across
different floor types. Hair removal vanes
prevent tangling around the bristles.
Dyson wand, with a built-in dusting and
crevice tool, convenient
for on-the-spot cleans.
Wand with Built-in dusting and crevice tool
Stored inside the wand is a ready-to-
go crevice tool for on-the-spot cleans.
The Awkward
gap tool is long
and slim, with a
22 degree twist,
for cleaning tight
gaps and hard-to-
reach places.
Extension hose
Awkward gap tool
Adds up to 61cm of
Long and narrow, with
a 22° twist to clean car flexible reach to any
tool attachment,
storage compartments,
to clean up high or
tight gaps and hard-to-
down low in your
reach places.
home or car.
A jointed
connector that
creates a flexible
joint between
A wide, triangular
the machine
shaped nozzle.
and the tool. It
must be used in
conjunction with
a tool or cleaner
head.
Fabric and
Up-top adaptor
mattress tool
Bends and locks at
Removes dust, dirt
different angles. For
and allergens from
effective cleaning in
mattresses and
hard-to-reach high
upholstery.
areas of your home.
Pliable bristles and
felt bumper strip on a
narrow, tapered tool.
A flexible hose
engineered from
tough wire and
durable plastic.
Soft dusting brush
Enclosed in a skirt
of soft nylon bristles
for gentle, vacuum-
assisted dusting of
delicate objects and
surfaces.
A plastic clip that
attaches to the wand
Wand clip
Clips to your vacuum's
wand to hold tools.