Getting Started - Dyson Gen5 Detect User Manual

Getting started

1 00%
Using the LCD screen
Finger pressing the
selection button on
the screen to move
between power
modes.
Power modes
Your machine has three power
modes for different tasks. Change
power modes quickly using the silver
Selection button.
The screen showing the machine set to
Eco mode with a full battery in green
to show that this will give the longest
battery life of the three modes.
Eco
Eco mode
Maximum run time for longer cleans
all around your home.
Auto Med
Auto and Med mode
Medium mode for the optimum balance
of power and run time. Attach your
cleaner head or Hair screw tool to
activate Auto mode. Suction power
automatically adapts to dust levels.
The screen showing the machine set
to Boost mode with a red battery to
show that this will give the shortest
Boost
battery life of the three modes.
Boost mode
Designed for intensive spot
cleaning of ground–in dirt.
Screen on the
filter end of the
machine.
Two screens showing the
machine set to Auto mode and
Med mode with a blue battery
showing that this will give a
medium length of battery life.
Arrow showing the end
of the wand connecting
to the cleaner head.
Location of the Selection
button on the screen
on the filter end of the
machine.
clik
click
clik
click
clik
click
click
clik
Diagram
showing the
connection of
the wand onto
the main body,
with the wand
release button
aligned with
the top of the
main body.
The screen, on the end of the
main body, showing a graph of
the sizing and counting of the
dust particles.
μm
10
90
180
500
38:37
Shows you when your
floor is clean
A piezo sensor continuously
sizes and counts dust
particles at the inlet.
Your machine categorises,
counts and displays the
amount of particles picked
up. Bars will rise and fall
depending on the amount
of debris and dust detected
– showing you in real-time
when your area is clean.