Clearing Obstructions From Your; Digital Motorbar™ Cleaner Head - Dyson Gen5 Detect User Manual

Clearing obstructions from your

Digital Motorbar™ cleaner head
Your Digital Motorbar™ cleaner head doesn't have a washable brush bar.
To maintain optimum performance, check your brush bar regularly and clear
any obstructions.
Make sure your machine is disconnected from the charger and your machine
power is turned off.
Don't put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Remove your brush bar
Press the cleaner head release button on the end of the wand.
Place the cleaner head upside down.
Use a coin to unlock the end cap.
Turn the end cap and remove it from your brush bar. Don't wash the end cap.
Slide your brush bar out of the cleaner head.
Look for obstructions
Clear any debris from your brush bar.
Check inside the cleaner head and remove any debris or blockages.
Your Digital Motorbar™ cleaner head and brush bar aren't washable.
Wipe over with a damp lint-free cloth.
Refit your brush bar
Push the end cap back on to your brush bar and slide it back into the
cleaner head.
Turn the end cap 90° clockwise into the locked position.
The removal of the brush bars
showing the lock in a horizontal
position and the unlock symbol
at 90° anti-clockwise and lock
symbol at 90° clockwise.
The lock located on the side
of the cleaner head, is rotated
90° anti-clockwise to release
the end cap and the brush bar
can be removed.
Clear debris alert is an
X-ray style graphic of a
brush bar inside a cleaner
head. A green arrow
indicates brush bar being
pulled out of the cleaner
head to the right.