Table of Contents
Advertisement
64
GETTING TO KNOW YOUR VEHICLE
AUTOMATIC TEMPERATURE
CONTROL (ATC)
Automatic Operation
1. Push the AUTO button on the faceplate, or the AUTO
button on the touchscreen (if equipped) on the Auto-
matic Temperature Control (ATC) Panel.
2. Next, adjust the temperature you would like the sys-
tem to maintain by adjusting the temperature con-
trol buttons. Once the desired temperature is dis-
played, the system achieves and automatically
maintains that comfort level.
3. When the system is set up for your comfort level, it
is not necessary to change the settings. You experi-
ence the greatest efficiency by simply allowing the
system to function automatically.
NOTE:
•
It is not necessary to move the temperature settings
for cold or hot vehicles. The system automatically
adjusts the temperature, mode, and blower speed
to provide comfort as quickly as possible.
•
The temperature can be displayed in US or Metric
units by selecting the US/Metric customer-
programmable feature.
To provide you with maximum comfort in the Automatic
mode during cold start-ups, the blower fan remains on
low until the engine warms up. The blower increases in
speed and transition into Auto mode.
Manual Operation Override
This system offers a full complement of manual over-
ride features. The AUTO symbol in the front ATC display
will be turned off when the system is being used in the
manual mode.
CLIMATE VOICE COMMANDS
Adjust vehicle temperatures hands-free and keep every-
one comfortable while you keep moving ahead.
Push the VR button on the steering wheel. After the
beep, say one of the following commands:
" Set the driver temperature to 70 degrees"
•
" Set the passenger temperature to 70 degrees"
•
Did You Know: Voice Command for Climate may only be
used to adjust the interior temperature of your vehicle.
Voice Command will not work to adjust the heated
seats or steering wheel if equipped.
OPERATING TIPS
Refer to the chart at the end of this section for sug-
gested control settings for various weather conditions.
Summer Operation
The engine cooling system must be protected with a
high-quality antifreeze coolant to provide proper corro-
sion protection and to protect against engine overheat-
ing. OAT coolant (conforming to MS.90032) is
recommended.
Winter Operation
To ensure the best possible heater and defroster perfor-
mance, make sure the engine cooling system is func-
tioning properly and the proper amount, type, and con-
centration of coolant is used. Use of the Air
Recirculation mode during Winter months is not recom-
mended, because it may cause window fogging.
Vacation/Storage
For information on maintaining the Climate Control sys-
tem when the vehicle is being stored for an extended
period of time, see
page 251.
Window Fogging
Vehicle windows tend to fog on the inside in mild, rainy,
and/or humid weather. To clear the windows, select
Defrost or Mix mode and increase the front blower
speed. Do not use the Recirculation mode without A/C
for long periods, as fogging may occur.
Outside Air Intake
Make sure the air intake, located directly in front of the
windshield, is free of obstructions, such as leaves.
Leaves collected in the air intake may reduce airflow,
and if they enter the air distribution box, they could plug
the water drains. In Winter months, make sure the air
intake is clear of ice, slush, and snow.
Advertisement
Table of Contents
