Engine Oil Filter; Engine Air Cleaner Filter - Alfa Romeo Tonale 2024 Owner's Manual

Table of Contents

ENGINE OIL FILTER

The engine oil filter should be replaced with a new filter

at every engine oil change.

Engine Oil Filter Selection

A full-flow type disposable oil filter should be used for

replacement. The quality of replacement filters varies

considerably. Only high quality Mopar® certified filters

should be used. If a Mopar® Engine Oil Filter is unavail-

able, only use filters that meet or exceed SAE/USCAR-

36 Filter Performance Requirments.

ENGINE AIR CLEANER FILTER

For the proper maintenance intervals

WARNING!

The air induction system (air cleaner, hoses, etc.) can

provide a measure of protection in the case of engine

backfire. Do not remove the air induction system (air

cleaner, hoses, etc.) unless such removal is neces-

sary for repair or maintenance. Make sure that no

one is near the engine compartment before starting

the vehicle with the air induction system (air cleaner,

hoses, etc.) removed. Failure to do so can result in

serious personal injury.

Engine Air Cleaner Filter Selection

The quality of replacement filters varies considerably.

Only high quality Mopar® certified filters should be

used.

Engine Air Cleaner Filter Inspection and

Replacement — Gas

Follow the recommended maintenance intervals as

shown in the Maintenance Plan in this section.

Engine Air Cleaner Filter Removal

1. Loosen the fasteners from the engine air cleaner

filter cover using a suitable tool.

page 212.

Engine Air Cleaner Filter Cover

1 — Engine Air Cleaner Filter Cover

2 — Fasteners

2. Lift the engine air cleaner filter cover to access the

engine air cleaner filter by rotating at the hinge and

pulling the cover away from the engine.

3. Remove the engine air cleaner filter from the hous-

ing assembly.

SERVICING AND MAINTENANCE

Engine Air Cleaner Filter Installation

NOTE:

Inspect and clean the housing if significant dirt or

debris is present before replacing the engine air

cleaner filter.

1. Install the engine air cleaner filter into the housing

assembly with the engine air cleaner filter inspec-

tion surface facing downward.

2. Tighten engine air cleaner filter cover fasteners

using a suitable tool.

CAUTION!

Do not overtighten the engine air cleaner filter cover

lid screws or damage may result.