Installation Equipment Requirements; Installation Safety - Western Digital OpenFlex Data24 Installation Manual

Installation Guide
1.1 Installation Equipment Requirements
This section lists everything that must be in place or available to perform the installation, including the
equipment and its components.
Table 2: Included Equipment and Components
Category
Components
Screws
Cables
Table 3: Additional Equipment Needed
T15 Torx Screwdriver w/ Torque Measuring Capability
ESD Mitigation Equipment (site specific)
Ethernet Cable w/ RJ-45 connectors
Table 4: Torque Specifications for Screws
M5 x 12mm T15 Torx screws w/ washers
1.2 Installation Safety
Safety is the number one priority for personnel responsible for installing the OpenFlex™ Data24 platform.
This section outlines what to consider before performing an installation.
Chassis w/ Supply Unit (PSU)s,
IO Modules (IOM)s, System Fans,
and pre-installed Rack Ears
Rails kit (includes left and right rail
assemblies and rack-mounting hardware)
Cable Management Arm (CMA)
(optional)
Assembly (includes a left and a right arm)
Drive Assembly Storage Devices
Drive Blanks
M5 x 10mm T15 Torx Flat
Head screws w/ washers
3m, C13 - C14 Power Cables
Equipment
T15 Torx Screwdriver
Level
Lift Equipment
Screw Type
M5 x 10mm T15 Torx screws

1.1 Installation Equipment Requirements

Item
1. Installation
# Included
1
1
1
1 - 24
(depending on configuration)
0 - 23
(depending on configuration)
6
2
Required or Recommended?
Required
Recommended
Recommended
Recommended
Required
Required
Torque Value
3.38-3.61 Nm / 30-32 in-lbf
3.38-3.61 Nm / 30-32 in-lbf
2