Video Mode - Loewe Mimo 28 Operating Instructions Manual

Modes of operation

Video mode

You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR's must be connected to the
Euro AV sockets (Scart) and logged in under the
"Connections" menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the
control bar. You also need Digital Link for timer
recordings of satellite programs controlled by
the TV set.
You can display up to two control bars but they
are only displayed by logged in VCR's and DVD
players.
Show/hide video
V =
control bar
DVD
VCR
O K
Select the video control bar if
several VCR's or a DVD player
and a VCR are connected.
Select function
Switch VCR/DVD on/off
Select video input (Euro-AV
AUX
socket) for the VCR
Rewind (only for VCR) or Scan in
rewind
Stop (STOP)
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
OK
When you start a recording, the program you
have just selected is recorded. You cannot switch
over to another channel, it is locked. You can
only switch over when the recording has
finished.
Exceptions:
1. You have installed several tuners (not PIP
tuners) in the TV set, then you can watch
STOP another channel with the second tuner.
2. You can also watch the signal via an AV
connection (e.g. DVD player or a second
STOP
AUX
VCR).
3. In a VCR with Digital Link Plus the VCR tuner
i
Info
M Menu
is used for the recording (not for satellite
End
E
programs).
Video menu
M
Pause (PAUSE)
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
Perform selected function.
Show the Video menu
Video menu
Timer recording
Timer change
Delete timer
Connections
i
Info
O K M Back
E End
The Video menu provides you with options for
timer programming by EPG, teletext or manually.
You can also change or delete timer data.
In the "Connections" menu you can log other AV
equipment on or off and make a "Digital Link
Plus data transfer. This serves to transfer the
transmitter data of the TV set (not satellite
stations) to the Digital Link Plus VCR.
Digital Link Plus VCRs have the possibility for
transferring the station data from the TV set to
the VCR via the Euro-AV cable (not for satellite
stations). Every time you change the station
memory of the TV, you are asked whether you
want to make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
Loewe VCRs also have Digital Link, a system for
controlling Loewe VCRs via the Euro-AV cable. If
the Loewe VCR only has Digital Link, the TV tuner
is used for recording. If you have installed your
Loewe VCR in a concealed place, you can operate
the Loewe VCR with the remote control. Operati-
on with the control bar also works with Digital
Link.
Digital Link must be switched on on the
video recorder.
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
17