Siemens SIMATIC ET 200eco PN M12-L Equipment Manual page 59

Article number
Alarms
Diagnoses
Diagnostics indication LED
Potential separation channels
tested with
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 03/2023, A5E46570510-AD
Isochronous mode
Equidistance
shortest clock pulse
max. cycle
Jitter, max.
Interrupts/diagnostics/status information
• Diagnostic alarm
• Maintenance interrupt
• Hardware interrupt
Diagnostic information readable
•
• Monitoring the supply voltage
parameterizable
–
• Wire-break
Short-circuit encoder supply
•
• RUN LED
• ERROR LED
• MAINT LED
• NS LED
MS LED
•
• IO LED
Channel status display
•
• for channel diagnostics
Connection display LINK TX/RX
•
Potential separation
between the load voltages
between Ethernet and electronics
• between the channels
between the channels and the power sup­
•
ply of the electronics
Isolation
• 24 V DC circuits
Test voltage for interface, rms value
•
[Vrms]
Degree and class of protection
IP degree of protection
Technical specifications
6ES7141-6BH00-0BB0
Yes
250 µs
4 ms
10 µs
Yes; Parameterizable
Yes; Parameterizable
Yes; Parameterizable
Yes
Yes
Yes
Yes; DI, input current < 0.3 mA, per channel
Yes; Per channel group
Yes; green LED
Yes; red LED
Yes; Yellow LED
Yes; green/red LED
Yes; green/red LED
Yes; red/green/yellow LEDs
Yes; green LED
Yes; red LED
Yes; green LED, only link
Yes
Yes
No
No
707 V DC (type test)
1 500 V; According to IEEE 802.3
IP65/67/69K
59