Interrupts - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

PROFINET IO
4.2 Interrupts/diagnostics alarms
4.2.2

Interrupts

The I/O device digital inputs DI 16x24VDC M12-L 8xM12 supports diagnostic and hardware
interrupts.
Diagnostic interrupt
The I/O device generates a diagnostic interrupt on the following events:
• Wire break
• Internal module fault
• Parameter error
• Hardware interrupt lost
• Short-circuit
Maintenance alarm
The I/O device generates a maintenance alarm on the following event:
• Low voltage 1L+
Hardware interrupt
If the fault-free signal (value status/QI = 1) is pending at the channel, meaning no diagnostic
error interrupt, the I/O device generates a hardware interrupt for the following events:
• Rising edge
• Falling edge
30
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 03/2023, A5E46570510-AD