Table of Contents
Advertisement
Advanced Shooting
PIP (Picture-in-Picture; VP-W87/W87D only)
The PIP(Picture-in-Picture) feature works in combination with the DIGITAL ZOOM function by using a small, super
imposed screen to show an image that is wider than the image being shot. This should help you to get a more clear
idea of what you are shooting.
-
The PIP function works in CAMERA mode only.
1. Set the power switch to CAMERA mode.
2. Turn on the DIGITAL ZOOM facility. (see page 29)
3. Press the MENU ON/OFF button, the MENU List
will be displayed.
4. Turn the UP/DOWN dial until PIP..........OFF is highlighted.
5. Press ENTER, the PIP ON and a small screen should appear.
6. Check which part you are shooting on the PIP screen,
and move the Zoom button to the "T" position to
activate the DIGITAL ZOOM.
7. Setting PIP......ON to OFF in the MENU will make the small screen
disappear and switch the PIP mode off.
Notes:
The PIP screen will be recorded if it is activated while recording.
The MENU ON/OFF function will not operate in EASY or REC mode.
PIP function will not operate in DSE mode.
ENGLISH
CAMERA
MENU
DIS........................OFF
D.ZOOM................OFF
PIP........................OFF
DISPLAY ..............ON
WHITE BAL. ........AUTO
WL.REMOCON ....ON
NEXT: MENU
ENTER
MENU
DIS........................OFF
D.ZOOM................OFF
PIP........................ON
DISPLAY ..............ON
WHITE BAL. ........AUTO
WL.REMOCON ....ON
NEXT: MENU
45
Advertisement
Table of Contents
