ENGLISH Video Camcorder COLOUR LCD VP-L600/L600B/L610/L610B/ L610D/L630/L650 VP-L600/L600B VP-L610/L610B/L610D/ L630/L650 Owner’s Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference. This product meets the intent of Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.
ENGLISH Table of Contents Precautions and Safety Instructions Getting to Know Your Camcorder Features...8 Descriptions Front View/Side View/Rear View...9, 10, 11 OSD (On Screen Display)...12 Accessories Supplied with Camcorder ...14 Remote Control (VP-L610/L610B/L630/L650 only) ...15 Self Recording with the Remote Control ...15 Preparing Adjusting the Hand Strap and Shoulder Strap ...16...
Page 3
Various Functions in PLAYER mode ...54 Adjusting the LCD...55 Setting the Speaker ON/OFF ...55 DSE in PLAYER mode...56 Maintenance Cleaning and careing for your Camcorder...56 Cleaning the Viewfinder ...56 Cleaning the LCD Panel ...56 Cleaning the Video Heads ...57 Storing the Camcorder...57 Using Your Camcorder Abroad ...58...
Precautions regarding rotation of LCD screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1) LCD screen closed. 2) Standard recording by using the LCD screen.
Page 5
When you take the camcorder from cool temperature inside to hot temperature outside during the summer. 2) If the “DEW” protection feature is activated, leave the camcorder in a dry, warm room with the cassette compartment opened and the battery removed.
Page 6
To preserve battery power, keep your camcorder turned off when you are not operating it. When your camcorder is in CAMERA mode, if it is left in STANDBY for more than 5 minutes without operation, it will automatically turn off to protect against un-necessery battery discharge.
Page 7
Do not use the wet type of head cleaner as it may damage the video heads. (see page 57) 5 minutes off timer in STANDBY mode To protect against tape and head-drum wear, your camcorder will automatically turn itself off if left in STANDBY mode without operation for more than 5 minutes.
Getting to Know Your Camcorder Features Your camcorder has many features available when recording or during playback. Snap Shot (VP-L630/L650 only) The Snap Shot function allows you to take a still picture as well as time limited audio. (see page 48) PIP (VP-L630/L650 only) The PIP(Picture-In-Picture) function shows the whole shot while recording with the Digital Zoom in use.
Getting to Know Your Camcorder Front View 3. PLAY/STILL (LIGHT) 2. EDIT (REW) 6. TAPE EJECT 13. VIDEO LIGHT 1. LENS 9. Remote Sensor 8. MIC 1. Lens (see page 63) 7. EVF (Electronic Viewfinder) 2. EDIT (REW) 8. MIC EDIT works in STANDBY mode.
Page 10
ENGLISH Getting to Know Your Camcorder Side View 24. BLC 23. FADE 20. SPEAKER 22. LCD Open 21. Lithium Battery 14. MENU ON/OFF (see page 26) 19. DSE (see page 40) MENU ON/OFF works in CAMERA and DSE works in CAMERA and PLAYER mode.
Page 11
Getting to Know Your Camcorder Rear View 25. ZOOM 36. BATTERY EJECT 27. Hooks for shoulder strap 28. AUDIO/VIDEO Out 32. START/STOP 35. Battery Pack Compartment 38. Recharging Indicator 34. DC Jack 31. POWER Switch 25. ZOOM (see page 30) 32.
ENGLISH Getting to Know Your Camcorder OSD (On Screen Display) You can turn the OSD on/off by setting the Display menu on/off. The TITLE, DATE/TIME, EASY and CUSTOM functions can be operated even after the OSD is turned off. The OSD is displayed in the viewfinder and the LCD monitor.
Page 13
Shows the title of the recording. It is superimposed on the scene. Self diagnosis (see page 59) (TAPE, TAPE END) Checks the operation of the Camcorder. m. DSE (Digital Special Effect) (see page 40) Indicates the DSE mode is activating.
ENGLISH Getting to Know Your Camcorder Accessories Supplied with Camcorder Make sure that the following basic accessories are supplied with your camcorder. Basic Accessory 1. AC Power Adapter 1. AC Power Adapter. (see page 18) 2. AC cord. (see page 18) 3.
Getting to Know Your Camcorder Remote Control (VP-L610/L610B/L630/L650 only) Description of Parts 1. Start/Stop (see page 23) 2. Self Timer 3. Still (see page 54) 4. WIDE (see page 30) 5. TELE (see page 30) 6. Display (see page 12)
The hand strap enables you to: - Hold the camcorder in a stable, comfortable position. - Press the Zoom and the red Record button without having to change the position of your hand. 1. Pull open the Hand Strap cover and release the Hand Strap, adjust its length and stick it back onto the Hand Strap cover.
The lithium battery maintains the clock function, title and preset contents of the memory; even if the battery pack or AC power adapter is removed. The lithium battery for the camcorder lasts about 8~10 months from the time of installation under normal operation.
The LCD display will switch on automatically when opened more than 30 degrees. Note: If the adapter is used next to a TV or the camcorder, it may cause interference on the TV or camcorder. Keep the adapter away from the TV, camcorder or the antenna cable during use.
DC supply to the camera. If the problem continues, contact the nearest service agent. 5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack. Even if the power is turned off, battery will be discharged.
ENGLISH Preparing Using the Battery Pack Table of continuous recording time based on model and battery type. VP-L630 VP-L600/L600B/L610/L610B/L610D Model Battery LCD ON, LCD OFF, LCD ON, Type EVF OFF EVF ON EVF OFF Approximately Approximately Approximately SB-L110A 80 minutes 90 minutes 130 minutes Approximately...
77°F(25°C). As the environmental temperature and conditions may be different when you actually use the camcorder, the remaining battery time may not be the same as the approximate continuous recording times given in these instructions.
ENGLISH Preparing Inserting and Ejecting a Cassette There are several cassette types, depending on: Colour system used (VP-L600/L600B/L610/L610B/L610D/L630/L650: PAL). Recording/playback time. Hi8/8mm (VP-L610/L610B/L610D/L630/L650 is Hi8). Inserting and Ejecting a Cassette Check to see if the battery pack is in place or AC adapter is connected. 1.
Make sure the battery level indicates that there is enough remaining power for shooting. (see page 21) We recommend that beginners, who are using the camcorder for the first time, switch the EASY mode on. a. To start shooting, press the red START/STOP button.
Page 24
LCD. When a cassette is loaded and the camcorder is left in STANDBY mode for over 5 minutes without being used, it will turn off automatically. To use it again, push the red START/STOPbutton or set power switch to OFF and then back to CAMERA.
(refer to figure) Recording with the LCD display 1. Hold the camcorder firmly using the hand strap. (see page 16) 2. Place your right elbow against your side. 3. Place your left hand under or next to the LCD to support and adjust it.
You can view the image you are recording or watch a playback of recordings made by using your camcorder’s 2.5 inch colour Liquid Crystal Display (LCD) screen. Under curtain conditions you may need to adjust the settings for the LCD display (outdoors for example).
Basic Shooting 9. Turn the UP/DOWN dial to adjust the LCD colour setting. 10. Press the ENTER. For further adjustment, repeat steps 7, 8, 9. 11. Press the MENU ON/OFF button to exit the menus. Notes: If you don't press a button within 30 seconds, the setting will disappear. The MENU ON/OFF function will not operate in EASY, REC or CUSTOM mode.
You can see the video you shot on the LCD. To stop the PLAY operation, press the (STOP) button. Note: You can also watch a recording on a TV screen. For more on how to connectthe camcorder to a TV or VCR see page 52. PLAYER PUSH...
LCD display for playback. The speaker’s volume is controlled by the UP/DOWN dial on the camcorder. The speaker will not work if the LCD display is closed. If the speaker does not work properly, check the following:...
ENGLISH Advanced Shooting Zooming In and Out Zoom is only available in CAMERA mode. Zooming is a technique that lets you magnify the size of the subject in the picture. For a more professional looking recording, don't use the zoom function too often. There are two zoom speeds to suit different needs : Gradual zoom (9~12 seconds from TELE/WIDE to WIDE/TELE) High-Speed zoom (3~6 seconds from TELE/WIDE to WIDE/TELE)
Advanced Shooting Digital Zoom Digital Zoom is only available in CAMERA mode. Magnification above 22x is achieved using digital technology. The picture quality deteriorates as you go towards the “T” side. It is recommend that you use the DIS (VP-L630/L650) feature with the DIGITAL ZOOM for picture stability.
Page 32
ENGLISH Advanced Shooting Switching the DIGITAL ZOOM ON/OFF (VP-L630/L650 only) The DIGITAL ZOOM feature is explained on page 31. 1. Set the power switch to CAMERA mode. (see page 18) 2. Press the MENU ON/OFF button. The MENU list will be displayed. 3.
Battery level, recording mode, counter, date/time, DIS ( ) will be displayed as the camcorder starts to run. The word “EASY” will appear on the LCD at the same time. However, the Date/Time will only be seen if it has been previously set.
ENGLISH Advanced Shooting CUSTOM-Creating your own customized recording settings You can customize the settings and save them for future use. The CUSTOM function only operates in CAMERA mode. 1. Set the power switch to CAMERA mode. (see page 18) 2. Press the MENU ON/OFF button, to bring up the MENU list. 3.
The DIS function only works in CAMERA mode. DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking or moving of the hand holding the camcorder (within reasonable limits). It provides more stable pictures when: Recording with the Zoom.
In the following situations, you should obtain better results by adjusting the focus manually. a. Apicture containing several objects, some close to the camcorder, others further away. Aperson enveloped in fog or surrounded by snow. c. Very shiny or glossy surfaces like a car.
Advanced Shooting 4. Turn the UP/DOWN dial up or down until the object is focused. 5. If you can't get a sharp picture, zoom out until you can. 6. To return to AF(Auto Focus), press the MF button again. Note: The MF function will not operate in EASY, CUSTOM or MENU mode.
ENGLISH Advanced Shooting PROGRAM AE (Automatic Exposure) The PROGRAM AE function only works in CAMERA mode. The PROGRAM AE modes allow you to adjust shutter speeds and aperture to suit different recording conditions. There are 6 automatic exposure modes. 1. AUTO mode Auto balance between the subject and the background.
Page 39
Advanced Shooting Setting the PROGRAM AE(Automatic Exposure) mode 1. Set the power switch to CAMERA mode. (see page 18) 2. Press the P.AE button, the ( ) symbol will be displayed. 3. Press the P.AE button until the appropriate symbol is displayed. No Display : Full Auto mode.
ENGLISH Advanced Shooting DSE (Digital Special Effects) in CAMERA mode The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to shoot and the effect that you wish to give.
Page 41
Advanced Shooting Selecting and recording DSE effects 1. Set the power switch to CAMERA mode. (see page 18) 2. Press the DSE button, GHOST or SEPIA will be displayed. 3. Keep pressing the DSE button, until the desired mode is displayed.
ENGLISH Advanced Shooting Setting and Recording DATE/TIME Setting and recording the date/time is only available in CAMERA mode. You can record the date/time on your recording, so you know when it was made. The date and time are recorded whenever they are displayed on the viewfinder or LCD. Setting a DATE/TIME Setting the DATE/TIME is possible in STANDBY of CAMERA mode only.
Page 43
4. Press the START/STOP button to start recording with the DATE/TIME in your recording. Notes: If your date and time settings are not maintained in the camcorder, it means the LITHIUM BATTERY is discharged and should be replaced. (see page 17) You cannot hide the recorded date or time during playback.
Selecting and Recording a Title Selecting and recording a TITLE is possible in the CAMERA mode only. The TITLE feature allows you to select a preset title stored in the camcorder’s memory. You can also select the language of the titles.
Page 45
9. Press ENTER. The selected title will appear on the screen for 2 ~ 3 seconds and will disappear. At the same, the camcorder will return to the menu mode. Recording a Title Note: Make sure that you have selected a TITLE.
ENGLISH Advanced Shooting Fade In and Out The FADE function only works in CAMERA mode. You can give your films a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. To Start Recording 1.
Advanced Shooting PIP(Picture-In-Picture, VP-L630/L650 only) The PIP(Picture-In-Picture) feature works in combination with the DIGITAL ZOOM function by using a small, super imposed screen to show an image that is wider than the image being shot. This should help you to get a clear idea of what you are recording. - The PIP function only works in CAMERA mode.
ENGLISH Advanced Shooting Snap Shot (VP-L630/L650 only) With the SNAP SHOT feature, your camcorder can function like a normal film camera, allowing you to take single still pictures. - The SNAP SHOT function only operates in CAMERA mode. 1. Set the power switch to CAMERA mode.
Advanced Shooting White Balance WHITE BALANCE (WHT.BAL.) is a recording function that preserves the unique colour of the object in any shooting condition. You may select the appropriate WHITE BALANCE mode to obtain good quality colour of the image. - AUTO: This mode is generally used to control the WHITE BALANCE automatically. - INDOOR: It controls WHITE BALANCE according to the indoor ambience.
ENGLISH Advanced Shooting Demonstration Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. The DEMO function is only available in CAMERA mode when you are not recording. The Demonstration operates repeatedly until the POWER switch is set to OFF.
Advanced Shooting Lighting Techniques When you use your camcorder, there are normaly only two main recording environments. You will be shooting outdoors (Normal recording or through an ND(Neutral Density) filter). You will be shooting indoors (Video light recommended or required).
Stereo type Mono type Connecting to a TV which has no Audio and Video input jack You can connect your camcorder to a TV through a VCR. Set the input selector on the VCR to LINE. The yellow one: Video The white one: Audio(L) You can use a SCARTadapter.
Page 53
Notes: Vibration from the built-in speaker can cause picture distortion. It is best to turn the built-in speaker off when your camcorder is connected to the TV. The playback system (Hi8/8mm) is selected automatically, depending on the tape format. VP-L600/L600B/L610/L610B/L610D/L630/L650 can playback both Hi8 and 8mm.
(PLAY/STILL) button during playback. To resume playback, press (PLAY/STILL) button again. Note: Your camcorder will automatically stop if it is left for more than 5 minutes in STILL mode without operation in order to prevent tape and head-drum wear. To locate a scene (picture search)
Playing back the Tape Adjusting the LCD The procedure for adjusting the LCD display in PLAYER mode is the same as the procedure for adjusting the LCD display in CAMERA mode, except that the power switch must be set to PLAYER instead of CAMERA.
Please refer to pages 40 and 41. Note: The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA and WIDE(16:9) effects will not operate when your camcorder is in PLAYER mode. Pressing the DSE button will scroll through the available settings. Stop at the one you require.
2. Keep the camcorder in a ventilated, dry and warm place. 3. Do not keep the camcorder in a place where the temperature often changes, such as in a car. 4. Keep the camcorder in a stable place.
Before using your camcorder abroad, check the following: Power sources You can use your camcorder in any country or area that uses 100V to 240V, 50/60 Hz. Were necessery, use a commercially available AC plug adapter, depending on the power used.
TAPE END slow its end. TAPE END the tape reached its end. TAPE slow there is no tape in the camcorder. the tape is protected TAPE slow from recording. D.EMG slow the camcorder has some C.EMG...
Troubleshooting Check Checking If you run into any problem using the camcorder, use the following table to try to resolve the problem. If these instructions do not allow you to solve the problem, take a note of: The model and serial number marked on the bottom of the camcorder.
Page 61
The contrast between the subject and the background is too you shoot a bright subject great for the camcorder to operate normally. Make the back- against a dark background. ground bright to reduce the contrast or use the BLC function (candle flame, for example) while you are shooting.
If the camcorder is brought directly from a cold place to a warm place, moisture may form inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.
Specifications The design and technical specifications may be changed without notice. System VP-L600/L600B/L610/L610B/L610D/L630/L650 Recording system Video: 2 rotary heads Helical scanning FM Audio: FM monaural system Video signal PAL colour, CCIR standard Usable cassette VP-L600/L600B : 8 mm, VP-L610/L610B/L610D/L630/L650 : Hi8 or 8 mm Tape speed SP: 20.051 mm/sec Speed mode...
ENGLISH Index - A - ABROAD ...58 EASY ...33 AC POWER ADAPTER ...18 EDIT ...24 ADJUST (LCD) ...26 EJECT...22 AF ...36 ENTER button...26 AUDIO...52 EXTERNAL MIC ...63 AUTO FOCUSING ..36 AUTO MODE ...38 AUTO POWER OFF ...24 FADE IN ...46 FADE OUT ...46 - B - FF (FAST FORWARD)...54...
Page 65
Index - O - START/STOP ...23 STILL ...54 OPERATION MODE ...13 STOP ...53 OSD ...12 STROBE ...40 SYSTEM ...63 - P - S-VIDEO ...53 PAL...58 PIP ...47 PLAY ...54 TAPE COUNTER ...13 PLAYER ...54 TAPE EJECT ...22 PORTRAIT MODE ...38 TAPE END ...59 POWER CONSUMPTION ...63 TIME ...42...
ENGLISH Power Sources (United Kingdom Only) The main lead on the power adapter is supplied with a molded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug, and if it requires, replacing a fuse approved to BS1362 of the same rating must be used.
Page 67
THIS CAMCORDER IS MANUFACTURED BY: *Samsung Electronics’ Internet Home Page United Kingdom http://www.samsungelectronics.co.uk France http://www.samsung.fr Australia http://www.samsung.com.au Germany http://www.samsung.de Sweden http://www.samsung.se Poland http://www.samsung.com.pl Spain http://www.samsung.es Italia http://www.samsung.it ELECTRONICS AD68-00334F...