Table of Contents
Advertisement
ABOUT YOUR WATER HEATER
HOW DO I KNOW IF THE WATER HEATER IS INSTALLED CORRECTLY?
Installation requirements are shown on
be installed:
by a qualified person, and
in accordance with the installation instructions, and
in compliance with Standards AS/NZS 3500.4, and either AS 5601 or
AS/NZS 5601.1 as applicable under local regulations, and all local codes and
regulatory authority requirements.
VICTORIAN CUSTOMERS
Notice to Victorian Customers from the Victorian Plumbing Industry Commission.
This water heater must be installed by a licensed person as required by the
Victorian Building Act 1993.
Only a licensed person will give you a Compliance Certificate, showing that the
work complies with all the relevant Standards. Only a licensed person will have
insurance protecting their workmanship for 6 years. Make sure you use a
licensed person to install this water heater and ask for your Compliance
Certificate.
DOES THE WATER CHEMISTRY AFFECT THE WATER HEATER?
The water heater is suitable for most public water supplies, however some water
chemistries may have detrimental effects on the water heater, its components
and fittings. Refer to
If you are in a known harsh water area or you are not sure of your water
chemistry, have your water checked against the conditions
pages
17
to
20.
HOW LONG WILL THE WATER HEATER LAST?
The water heater is supported by a manufacturer's warranty
There are a number of factors that will affect the length of service the water
heater will provide. These include but are not limited to the water chemistry, the
water pressure, the water temperature (inlet and outlet) and the water usage
"Precautions"
pattern. Refer to
"Water Supplies"
on page 17.
on page 11.
pages
24
to
32. The water heater must
12
described on
(refer to page
4).
Advertisement
Table of Contents
