Toshiba CL10W User Manual page 56

AC adaptor
not
connected
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing amber
Amber
White
No light
If the battery pack becomes too hot while it is being charged, the charge
stops and the DC IN/Battery indicator goes out. When the temperature of
the battery pack falls to a normal range, charging will resume. This process
occurs regardless of whether the computer's power is on or off.
Power indicator
Check the Power indicator to determine the power status of the computer.
The following indicator conditions should be noted:
White
User's Manual
Remaining
battery capacity
is above low
battery trigger
point
Remaining
battery capacity
is below low
battery trigger
point
Remaining
battery capacity
is exhausted
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates that the AC adaptor is connected and
the battery is charging.
Indicates that the AC adaptor is connected and
the battery is fully charged.
Under any other conditions, the indicator does
not light.
Indicates that power is being supplied to the
computer and the computer is turned on.
Power on
• Operates
• LED: off
• Operates
• LED: flashes
amber
Computer shuts
down
Power off
(no operation)
3-19