Table of Contents
Advertisement
2.
3.
1.
2.
3.
4.
5.
If you have previously chosen to delete the recovery image without creating
"Recovery Media", the "Recovery Media" cannot be created.
However, if you have already created a "Recovery Media", you can use it
to restore the recovery image.
If you have not created "Recovery Media", contact TOSHIBA support for
assistance.
Restoring the pre-installed software from the Internal
Storage
A portion of the total internal storage space is used to store the recovery
image which can be used to restore pre-installed software in the event of a
problem.
Make sure that the AC adaptor is connected during the restoring process.
When you reinstall the Windows operating system, the internal storage will
be reformatted and all data will be lost.
1.
2.
3.
4.
5.
You can also perform the restoration through Settings in the operating
system:
User's Manual
In the TOSHIBA Setup Utility screen, select Advanced -> System
Configuration -> Boot Mode.
Note: Please skip the following contents if you cannot find the Boot
Mode option in your system.
Select UEFI Boot (Default).
Load the Recovery Media into the Optical Disc Drive or insert the
recovery USB Flash Memory into one available USB port.
Click Start -> Power and then select Restart.
Hold down the F12 key and then release this key one second after the
computer is power on.
Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media.
A menu is displayed from which you should follow the on-screen
instructions.
Click Start -> Power and then select Restart.
Hold down 0 (zero) key and then release this key one second after the
computer is power on.
Select Troubleshoot.
Select Reset your PC.
Follow the on-screen instructions to finish the recovery.
2-17
Advertisement
Table of Contents
