Automatic Tuning; Manual Tuning - Yamaha YSP-4000 Owner's Manual

Automatic tuning

Automatic tuning is effective when the radio station
signals are strong and there is no interference.
1
Set the operation mode selector to TV/AV.
TV/AV
YSP
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
FM
y
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press FM/XM
again to display "FM" (U.S.A. and Canada models only).
3
Press SEARCH repeatedly until the AUTO
indicator lights up in the front panel display.
SEARCH
Lights up
No colon (:)
If a colon (:) appears in the front panel display, tuning
is not available. Press PRESET/TUNE to turn the
colon (:) off.
4
Press ENTRY (
automatic tuning.
When this unit is tuned into an FM station, the
TUNED indicator lights up and the frequency of the
station appears in the front panel display.
• Press to tune into a higher frequency.
• Press to tune into a lower frequency.
ENTER

Manual tuning

If the desired FM station signal is weak, tune into it
manually.
Note
Manual tuning automatically switches the tuner to the monaural
reception mode to increase the signal quality.
1
Set the operation mode selector to TV/AV.
TV/AV
YSP
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
FM
y
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press FM/XM
again to display "FM" (U.S.A. and Canada models only).
FM tuning
/ ) once to begin
ENTRY
51
En