RCA RV-9900 User Manual page 7

First Things First
TV and VCR connection
(TV without Audio output Jacks)
This connection provides
• stereo or surround sound from TV
programs broadcast in stereo
• stereo, surround sound or mono sound
from a VCR
• viewing one channel on TV while
recording another channel
To use this connection, you must
have
• (1) paired (red/white) stereo cable
• (2) coaxial cables
To Connect
1. Connect the cables as shown in the
diagram to the right.
Using This Connection
To watch TV programs
1. Turn off the VCR.
2. Press TV and tune to a channel.
To watch or play a tape on the VCR
1. Press VCR1 on your remote
2. Press PLAY.
To record one program and watch another
1. Press VCR1 on your remote and tune to
a channel.
2. Begin recording.
3. Make sure TV/VCR switch on the
VCR is set to TV.
4. Press TV and tune to a channel.
If your TV has more than one video
input, make sure the VCR and VIDEO
buttons tune the TV to the same
channel that the receiver monitor
out is plugged into.
Refer to the TV's user's guide for
more information.
For additional video device
connections, refer to Appendix A.
CABLE
IN
BOX
OUT
VCR
IN
OUT
VIDEO R L
TV
AUDIO
RECEIVER
CD TAPE
IN OUT
OR ANTENNA
IN FROM ANT
CH3
CH4
OUT TO TV
CABLE /
ANTENNA
VIDEO
VCR VIDEO MONITOR
IN OUT IN OUT
TV VCR
VIDEO
SUB
WOOFER
IN OUT
AUDIO
5