RCA RV-9900 User Manual page 23

Tour of the Receiver
MENU/PROGRAM For some models, stores channels in the
TV's memory.
MOVE arrows In some models, when using PIP, moves the
small picture to another corner of the screen. Also, used for
menu navigation in some TV models.
Number Buttons Let you enter channel numbers and time
settings when needed.
PIP Turns on and off picture-in-picture on most RCA TV
models with PIP.
POWER Turns the TV off.
PREV CH•DISC Returns to the previous channel.
RESET•REP Returns picture quality controls to their
original settings.
SKIP Press once before changing channels and the TV waits
30 seconds before returning to the original channel. Press
repeatedly to increase the time.
SWAP PIP Swaps the main picture in the PIP window.
TV Turns on the TV and puts the remote in TV mode.
TV MENU Displays the TV's on-screen menus.
VCR Controls
CHAN up and down Tunes to the next or previous channel
when watching TV through the VCR.
CLEAR Resets the tape counter and corrects entries when
programming the menus.
DISPLAY Displays channel, time and counter information on
the screen.
FF Fast forwards a tape. Also, searches forward while a tape
is playing.
INPUT•SEEK For some VCR models, selects line input
or tuner.
MENU/PROGRAM Displays the on-screen
programming menus.
Number Buttons Let you enter numbers when needed.
PAUSE Pauses a tape.
PLAY Plays a tape.
POWER Turns the VCR off.
PREV CH•DISC Returns to the previous channel.
REC Records a tape.
If you have questions about the
use of the remote buttons with
another component, refer to the
component's user's guide.
21