RCA RP-6200 User Manual page 9

U
SING THE
P
ROGRAMMING
Your scanner is capable of storing up to 20 frequencies in memory locations
called channels.
To program frequencies:
1. Press MANUAL and then enter the channel you want to program. The current
channel will appear on the left of the display and the one you just entered
will appear on the right.
2. Press PGM and wait for PROGRAM to appear in the display.
3. Enter the frequency of your choice.
4. Press ENTER/L-OUT to store the frequency.
NOTE : Should you make an incorrect entry, Error will show in the display.
Simply press the CLEAR button and repeat Step 3.
If you want the scanner to pause 2 seconds on a particular frequency before
scanning the next channel, see the next section - USING DELAY.
5. Repeat Steps 1-4 to program additional channels not in sequence or Steps 2-
4 to do so in sequence.
After entering the frequencies of your choice into the scanner's channel
memory, you can scan those channels or manually select them.
S
CANNER
F
REQUENCIES
7