Using The Scanner; Djustingv; Olume And Programming Frequencies; Quelch - RCA RP-6200 User Manual

U
SING THE
A
DJUSTING
1. Turn the VOLUME knob counterclockwise to MIN and the SQUELCH knob
clockwise to MAX.
2. Turn the POWER knob to ON. The display will show SCAN, a channel number
and a frequency.
NOTE: When turned on, the scanner may automatically begin scanning
channels and frequencies.
3. Press MANUAL to stop the display from scanning. A channel and frequency
will appear in the display.
4. Turn the VOLUME knob clockwise 1/5 turn. However, if the scanner is in the
middle of a transmission, wait until it finishes before turning the knob.
5. Turn SQUELCH knob slowly counterclockwise until there is an audible hissing
sound.
6. Now turn the SQUELCH knob clockwise until the hissing sound stops.
NOTE: Should the scanner begin to pick up partial, weak or unwanted
transmissions, simply rotate the SQUELCH knob clockwise. This decreases the
scanner's sensitivity to these frequencies.
6
S
CANNER
V
OLUME AND
S

QUELCH