Table of Contents
Advertisement
User Guide for the Polycom SoundStation IP 6000 Phone
Holding and Resuming Conferences
Splitting Conferences
3 - 8
When you place a conference call on hold, you place all other conference
participants on hold.
To place a conference call on hold:
From the Active:Conference screen, press the Hold soft key.
>>
The Hold:Conference screen displays. The other parties in the conference call
are put on hold.
From the Hold:Conference screen, you can do the following:
•
To resume the conference call, press the Resume soft key. The
Active:Conference screen will display again.
•
To place a call to a new party, press the New Call soft key. The conference
remains on hold, and the new call becomes the active call.
•
To end the conference call and split the conference into two separate calls
on hold, press the Split soft key.
When a conference has been established, a Split soft key is available. When
you split a conference, you end the conference and put all parties on hold.
To split a conference:
From the Active:Conference screen, press the Split soft key.
>>
The conference ends, and all calls are split into individual calls and put on
hold.
Advertisement
Table of Contents
