Table of Contents
Advertisement
Using the TV/VCR Features
Using the TV/VCR Features
To Reset Picture Controls to the Factory Setting
Channel Labeling
To Label the Channel
To Clear a Channel Name
Commercial Skip
Press 3 in step 3 of "To Adjust the Video" to reset the picture
controls to the levels set at the factory. Or, press the remote's
RESET button.
You can label up to twenty-two channels with the station name
(such as ABC, NBC, CBS, etc.) for easier identification. Labels can
be up to four characters.
1. Press MENU to display the TV/VCR MAIN MENU.
2. Press 5 to display the SETUP menu.
3. Press 7 to display the LABEL CHANNELS screen.
4. Press CHAN up or down or 0-9 to change the channel number if
necessary. Then, press VOL < or > to move the cursor to the
Channel Label column.
5. Press CHAN
or , and then VOL < or > to select each letter of
the station name.
6. Press MENU to save the channel name.
While in the channel label column, press RESET to remove
all characters.
Commercial Skip is an on-screen timer that allows you to bypass
commercials. When a commercial comes on, you can activate the
Commercial Skip timer to run from 30 seconds to 59 minutes. While
the timer is counting down, you are free to watch other channels.
After the timer runs out, the TV/VCR automatically changes back to
your original channel.
Besides using Commercial Skip to switch back to the current station
after a block of commercials, you can also use it as a reminder that a
favorite program is about to start.
Note: The Commercial Skip timer cannot be activated if a tape is
loaded in the TV/VCR.
1. Press SKIP/SEARCH repeatedly until the desired time amount is
displayed. Each press increases the time in 30 second increments
up to 4 minutes. After 4 minutes, each press increases the timer
by 1 minute until 59 minutes is reached.
2. To cancel Commercial Skip, press CLEAR on the remote. The TV
will not change channels.
RESET PICTURE CONTROLS
All picture controls
have been reset to
factory defaults.
Press MENU to continue
TV/VCR MAIN MENU
1 Timer Recordings
2 Picture Quality
3 Time
4 Closed Captioning
5 Setup
SETUP
1 Auto channel search
2 Add/Remove channels
3 Auto play
4 Auto repeat
5 Alert sound
6 Signal type: CABLE
7 Label Channels
LABEL CHANNELS
Channel
Channel
#
Label
8
----
LABEL CHANNELS
Channel
Channel
#
Label
10
ABC
Press Chan up/dn or 0-9
to change # or letter
Press Vol < or > to move
MENU=save CLEAR=Reset
Skip
0:30
9
Advertisement
Table of Contents
