Tools Menu - THOMSON ROC1117SAM Operating Instructions Manual

Replacement Remote for
SAMSUNG SERIES: TV/LCD/LED/HDTV
Thank you for your decision for a Thomson product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
This remote control can by default control 90%
models of SAMSUNG brand, there´s no need to set
it up. lf the remote doesn't work, please choose
one of the setup methods described in chapter 5.
The keys
1. Input signal source / Indicator LED
2. POWER TV ON / OFF
3. Switch to signal source PC
4. Switch to signal source TV
5. Switch to signal source HDMI
6. Numeric keys 0 – 9 to enter channel
numbers
7. Previous channel
8. Access to 2- or 3- digit channel numbers
9. TV Mute
10. Channel up/down
11. Teletext ON / OFF / MIX
12. Smart TV Menu
13. Change your TV's volume
14. Media Player
15. Show the Electronic Program Guide
(if supported by the TV)
16. Program MENU

17. TOOLS MENU

18. On-Screen Info
19. Use when watching TV to see what's on
other channels or to highlight/Select
On-Screen options
20. Return / Back key
21. Turn off the menu of the selected product.
22. Use to select a variety of on screen options
23. Sound Mode
24. Picture Mode
25. Multi Sound
26. Favorite Channel
27. Picture Size
28. 3D Mode ON/OFF
29. Suspends play and stops on an image
(DVD, BlueRay...)
30. Fast Forward (DVD, BlueRay ... )
31. Goes backward (DVD, BlueRay ... )
32. Stop the disc (DVD, BlueRay ... )
PIP (Picture in Picture)
33. Play a disc (DVD, BlueRay ... )
PIP Position
34. Record
SWAP PIP
1. Explanation of the Note and Warning
symbol
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Replacement Remote Control
• 2x AAA Batteries
• This operating instructions incl. Code List
3. Safety notes
• Do not use the Universal Remote Control in
moist or wet environments and avoid spray-
water contact.
• Do not expose the Universal Remote Control
to heat sources or direct sunlight.
• Do not drop the Universal Remote Control.
• Never open the Universal Remote Control. It
contains no user-serviceable parts.
• As with all electrical devices, keep the
Universal Remote Control away from
children.
Warning
• When inserting batteries, note the
correct polarity (+ and - markings) and
insert the batteries accordingly. Failure to
do so could result in the batteries leaking
or exploding.
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of
children.
• Do not allow children to change batteries
without supervision.
• Remove the batteries from products
that are not being used for an extended
period.
4. Getting started – installing the Batteries
Note
• Use 2 AAA batteries
• Remove the battery cover from bottom
of remote.
• Check the +/- polarity on the batteries
and inside the compartment.
• Insert the batteries.
• Slide the battery holder back into the
remote until the clips locate.
Note – Code Memory
This remote control saves the settings during
battery change.
5. Setup
This remote control can by default control 90%
models of SAMSUNG brand, there´s no need to
set it up. lf it doesn't work, please choose one
of the following setup methods 5.1 or 5.2.
5.1 INPUT CODE
CODE List:
001, 002, 003, 004, 005, 006, 007, 008,
009, 010, 011, 012, 013, 014, 015, 016
1. Press and hold the key [MUTE] and
[POWER] until the LED will be lit,
then release keys.
2