Electrical System; Checking And Charging The Battery; Checking The Fuses; Replacing The Headlight Bulb - Yamaha XT250X 2008 Service Manual

EAS21750

ELECTRICAL SYSTEM

EAS21760

CHECKING AND CHARGING THE BATTERY

Refer to "ELECTRICAL COMPONENTS" on
page 7-29.
EAS21770

CHECKING THE FUSES

Refer to "ELECTRICAL COMPONENTS" on
page 7-29.
EAS21780

REPLACING THE HEADLIGHT BULB

1. Remove:
Headlight cowling "1"
G
2. Remove:
Headlight unit bolts "1"
G
3. Disconnect:
Headlight coupler "1"
G
Bulb cover "2"
G
1
2
4. Remove:
Headlight bulb holder "1"
G
All manuals and user guides at all-guides.com
1
1
3-26
ELECTRICAL SYSTEM
1
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
5. Install:
Headlight bulb
New
G
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
6. Install:
Headlight bulb holder
G
Bulb cover
G
Headlight coupler
G
7. Install:
Headlight unit
G
Headlight unit bolt
7 Nm (0.7 m•kg, 5.1 ft•lb)
EAS21800

ADJUSTING THE HEADLIGHT BEAM

1. Adjust:
Headlight beam (vertically)
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.