Troubleshooting - Yamaha XT250X 2008 Service Manual

EAS27290

TROUBLESHOOTING

Any of the following fail to light: turn signal light, brake light or an indicator light.
G
The horn fails to sound.
G
The speedometer fails to operate.
G
NOTE:
Before troubleshooting, remove the following part(s):
1.Seat
2.Rear side cover
3.Tool box
1. Check the fuse.
Refer to
"CHECKING THE FUSE" on
.
page 7-37
OK↓
2. Check the battery.
Refer to
"CHECKING AND CHARG-
ING THE BATTERY" on page 7-37
OK↓
3. Check the main switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-33
OK↓
4. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
This circuit is OK.
Check the signaling system
The horn fails to sound.
1. Check the horn switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-33
OK↓
2. Check the horn.
Refer to
"CHECKING THE HORN" on
.
page 7-45
OK↓
3. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
This circuit is OK.
All manuals and user guides at all-guides.com
NG→
NG→
.
NG→
.
NG→
NG→
.
NG→
NG→
7-21
SIGNALING SYSTEM
Replace the fuse(s).
Clean the battery terminals.
G
Recharge or replace the battery.
G
Replace the main switch.
Properly connect or repair the signaling
system's wiring.
Poor conducting of horn switch. Replace the
left handlebar switch.
Replace the horn.
Properly connect or repair the signaling
system's wiring.