Removing The Front Fork Legs; Disassembling The Front Fork Legs - Yamaha XT250X 2008 Service Manual

EAS22970

REMOVING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
front wheel is elevated.
2. Loosen:
Upper bracket pinch bolt "1"
G
Front fork cap bolt "2"
G
Lower bracket pinch bolts "3"
G
EWA13640
WARNING
Before loosening the upper and lower brack-
et pinch bolts, support the front fork leg.
All manuals and user guides at all-guides.com
2
1
3
4-42
EAS22980

DISASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Drain:
Fork oil
G
NOTE:
Stroke the outer tube several times while drain-
ing the fork oil.
2. Remove:
Dust seal "1"
G
Oil seal clip "2"
G
(with a flat-head screwdriver)
ECA14180
CAUTION:
Do not scratch the inner tube.
3. Remove:
Damper rod assembly bolt
G
Copper washer
G
NOTE:
While holding the damper rod assembly with the
damper rod holder "1" and T-handle "2", loosen
the damper rod bolt.
Damper rod holder
90890-01460
FRONT FORK