Table of Contents
Advertisement
b.
do not operate the tool in explo-
sive atmospheres, such as in the
presence of flammable liquids,
gases, or dust. The tool is able to
create sparks resulting in the ignition
of the dust or fumes.
c.
Keep bystanders, children, and
visitors away while operating the
tool. Distractions are able to result in
the loss of control of the tool.
personal safety
a.
Stay alert. Watch what you are do-
ing and use common sense when
operating the tool. Do not use the
tool while tired or under the influ-
ence of drugs, alcohol, or medica-
tion. A moment of inattention while
operating the tool increases the risk
of injury to persons.
b.
dress properly. do not wear loose
clothing or jewelry. contain long
hair. keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of injury to persons
as a result of being caught in moving
parts.
c.
avoid unintentional starting. Be
sure the switch is off before con-
necting to the air supply. Do not
carry the tool with your finger on the
switch or connect the tool to the air
supply with the switch on.
d.
do not overreach. keep proper
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpect-
ed situations.
SKU 65706
For technical questions, please call 1-800-444-3353.
e.
use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-
duty work gloves during use.
always wear eye protec-
f.
tion. Wear ANSI-ap-
proved safety goggles.
g.
always wear hearing
protection when using
the tool. Prolonged expo-
sure to high intensity noise
is able to cause hearing
loss.
h.
danger! keep hands and body
away from cutting area and blade.
keep your second hand on aux-
iliary handle or motor housing.
Contact with the blade will result in a
serious injury.
i.
do not reach underneath the work.
The guard does not protect you from
the blade below the work.
j.
never hold a piece being cut in
your hands or across your leg. It is
important to support the work proper-
ly to minimize body exposure, blade
binding, or loss of control.
tool use and care
a.
Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the work by hand or against
the body is unstable and is able to
lead to loss of control.
b.
do not force the tool.
correct tool for the application. The
correct tool will do the job better and
Use the
Page 3
Advertisement
Table of Contents
