Polaris RZR XP 1000 High Lifter 2022 Owner's Manual page 37

FEATURES AND CONTROLS
SEATS
Before operating the vehicle, always push down on all seat backs to ensure the
latches are secure.
SEAT ADJUSTMENTS
On seats equipped with an adjustment lever under the front edge of the seat,
pull the lever to the left. Slide the seat forward or rearward to the desired
position. Release the lever. The seat will lock into the new position.
For other seat styles, loosen (do not remove) the four screws located on the seat
bottom. Slide the seat forward or rearward to the desired position. Tighten the
screws to 4 ft-lbs (5.4 N·m). Do not overtighten.
SEAT REMOVAL
q
1. Pull up on the seat latch lever located under the rear edge of the seat.
2. Tilt the seat forward.
3. Lift the seat upward to remove it from the vehicle.
4. Reverse this procedure to reinstall the seat. Make sure the seat tabs at the
front edge of the seat slide under the seat retainer bar.
5. Press down firmly at the rear of the seat to engage the rear latch.
35