Polaris RZR XP 1000 High Lifter 2022 Owner's Manual page 157

TRANSPORTING THE VEHICLE
Cargo and other loose vehicle parts may fly off while transporting this vehicle.
Secure or remove all cargo, and inspect the unit for loose parts prior to
If transporting the vehicle in a non-enclosed trailer, then the vehicle must FACE
Failure to comply may allow airflow, vibration, or other factors to separate the
roof from the vehicle and cause an accident, resulting in serious personal
Follow these procedures when transporting the vehicle.
After a ride, allow the engine to idle for 30 seconds before stopping the engine.
1. Place the transmission in PARK.
2. Stop the engine. Turn the key back on to the accessory or ON position
without starting the engine. Slowly release the brake pedal and make sure
the transmission is in PARK before exiting the vehicle, verifying that the
PARK position is shown on the display.
3. Prior to securing the vehicle, adjust the vehicle's compression damping
settings to their lowest (softest) setting by turning the clickers all the way out.
4. Secure the vehicle.
5. After the vehicle has been secured, verify the gauge indicates PARK, and
turn the vehicle power off.
6. Remove the key to prevent loss during transporting. Secure the fuel cap and
seats. Ensure that the seats are attached correctly and are not loose.
Cargo and other loose vehicle parts may fly off while transporting this vehicle.
Secure or remove all cargo, and inspect the unit for loose parts prior to
7. Always tie the frame of the POLARIS vehicle to the transporting unit securely
with suitable straps or rope. Do not attach tie straps to the front control arm
bolt pockets.
FORWARD, or roof must be removed.
injury or death.
This will allow the turbo system to cool down.
WARNING
transport.
NOTICE
WARNING
transport.
MAINTENANCE
155