Table of Contents
Advertisement
VC709 Evaluation Board Features
Overview
The VC709 evaluation board for the Virtex®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Virtex-7 XC7VX690T-2FFG1761C FPGA.
The VC709 board provides features common to many embedded processing systems,
including dual DDR3 small outline dual-inline memory module (SODIMM) memories, an
8-lane PCI Express® interface, general purpose I/O, and a UART interface. Other features
can be added by using mezzanine cards attached to the VITA-57 FPGA mezzanine
connector (FMC) provided on the board. A high pin count (HPC) FMC is provided. See
VC709 Board Features
described in
Additional Information
See
relevant to the VC709 board.
VC709 Board Features
•
•
•
•
•
•
•
VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
for a complete list of features. The details for each feature are
Feature Descriptions, page
Appendix F, Additional Resources
Virtex-7 XC7VX690T-2FFG1761C FPGA
2X 4 GB 1600MTs DDR3 memory SODIMMs
128 MB linear byte-wide peripheral interface (BPI) flash memory
USB JTAG through Digilent module
Clock generation
•
Fixed 200 MHz LVDS oscillator
•
Fixed 233.33 MHz LVDS oscillator
2
•
I
C programmable LVDS oscillator
•
SMA connectors
•
SMA connectors for GTH transceiver clocking
GTH transceivers
•
FMC HPC connector (eight transceivers)
•
SMA connectors (one pair for MGT_REFCLK)
•
PCI Express (eight lanes)
•
4 X Small form-factor pluggable plus (SFP+) connectors
PCI Express endpoint connectivity
•
Gen1 8-lane (x8)
www.xilinx.com
10.
for references to documents, files, and resources
Chapter 1
7
Send Feedback
Advertisement
Table of Contents
