Table of Contents
Advertisement
VC709 Evaluation Board Features
Overview
The VC709 evaluation board for the Virtex®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Virtex-7 XC7VX690T-2FFG1761CES
FPGA. The VC709 board provides features common to many embedded processing
systems, including dual DDR3 small outline dual-inline memory module (SODIMM)
memories, an 8-lane PCI Express® interface, general purpose I/O, and a UART interface.
Other features can be added by using mezzanine cards attached to the VITA-57 FPGA
mezzanine connector (FMC) provided on the board. A high pin count (HPC) FMC is
provided. See
feature are described in
Additional Information
See
relevant to the VC709 board.
VC709 Board Features
•
•
•
•
•
•
•
VC709 Evaluation Board
UG887 (v1.0) February 4, 2013
VC709 Board Features
Feature Descriptions, page
Appendix F, Additional Resources
Virtex-7 XC7VX690T-2FFG1761CES FPGA
2X 4 GB 1866MTs DDR3 memory SODIMMs
128 MB linear byte-wide peripheral interface (BPI) flash memory
USB JTAG through Digilent module
Clock generation
•
Fixed 200 MHz LVDS oscillator
•
Fixed 233.33 MHz LVDS oscillator
2
•
I
C programmable LVDS oscillator
•
SMA connectors
•
SMA connectors for GTH transceiver clocking
GTH transceivers
•
FMC HPC connector (eight transceivers)
•
SMA connectors (one pair for MGT_REFCLK)
•
PCI Express (eight lanes)
•
4 X Small form-factor pluggable plus (SFP+) connectors
PCI Express endpoint connectivity
•
Gen1 8-lane (x8)
www.xilinx.com
for a complete list of features. The details for each
7.
for references to documents, files, and resources
Chapter 1
5
Advertisement
Table of Contents
