How To Remove The Sewing Table; When Replacing The Bobbin Thread - JUKI APW-896N/IP-420 Basic Operation Manual

Hide thumbs Also See for APW-896N/IP-420:

Table of Contents

Available languages

2. HOW TO REMOVE THE SEWING TABLE

CAUTION

Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the

sewing machine.

❷

❶

① Move the clamp foot to the rear end of its stroke.

② Insert your fingers into notches A in the bottom

of right- and left-hand sewing tables ❶ and ❷ ,

and push up the sewing tables.

③ Move the tables in the direction of the arrow

keeping the above state, and you can see the

bobbin case.

At this time, move the sewing tables

so as not to allow the sewing tables to

come in contact with the needles.

④ After replacing the bobbin thread, return

the sewing tables in place by following the

above-mentioned steps of procedure in the

reverse order. Now, firmly set the sewing tables

on the throat plates and the pins.

− 3 −

Table of Contents

Table of Contents